When I converted my 110 from 308 to 6.8, I was able to get the bolt head from PTG. I’m sure they would have what you’ll need.
When I converted my 110 from 308 to 6.8, I was able to get the bolt head from PTG. I’m sure they would have what you’ll need.
Finding a Staggered feed magazine box, follower & spring can be like finding a unicorn. I've got a couple, but won't part with them. They are just too hard to find anymore.
There are articles on this forum that explains how to remove the stagger feed magazine. It will require a wide blade screw driver. The spacer in your current magazine should have tabs on both sides securing it to the mag body. the abs will have to be bent out and Dremeled off. It's a lot of work and you'll still need a long mag follower.
Vietnam Vet, Jun 66 - Dec 67
I sent you a PM.
Vietnam Vet, Jun 66 - Dec 67
See this FAQ topic about stagger feed mags - https://www.savageshooters.com/conte...Feed-Magazines
Bolt heads, no problem, but mag follower and spring, completely different story.
Would it be possible/better to convert to blind centerfeed? Or AICS?
https://pacifictoolandgauge.com/home...azine_size-308
Consider "single feed" so no mag issues??
Oz never gave nothing to the Tin Man, that he didn't already have.
Posting Permissions
Reply With Quote
Bookmarks