Put the safety in the middle position. Test to see if it will "fire". You need a no fire condition or we fix our trigger, then move forward.

Pull the bolt out. Load the magazine. Look down through the rear of the action. Is the cartridge high enough for the bolt to strip it out of the magazine? Put the bolt back in and test the cartridge movement as the bolt head makes contact with the base/rim of the cartridge. Move it in small increments, watch the cartridge as it moves forward. The cartridge must stick up high enough and stay high enough through the whole stroke of the bolt. It also must lift up in the front enough to where the bullet glides into the feed ramp. Open or close the feed ramp in small increments to get the desired results.


Good luck