Quote Originally Posted by tobnpr View Post
Absolutely.
The reverse would be so; if you have a go, you don't really need the no-go.
Set headspace with the go, add a layer of cellophane packing tape trimmed to fit the back of the case. Bolt handle(stripped bolt) shouldn't fall.

IOW, you can make a go gauge "longer" to emulate a no-go, but ya can't shorten a no-go to make a "go".
Would it be possible to use a new piece of brass as a go? Since I already have the no go there would be no danger I'm doing that as long as the bolt won't close on the no go correct?