Is it bedded in the stock? Does the barrel contact the stock?
Sent from my iPhone using Tapatalk
Is it bedded in the stock? Does the barrel contact the stock?
Sent from my iPhone using Tapatalk
It's pillar bedded. No barrel contact I removed a little material to make sure. Check with a dollar bill when it was on the sand bag.Originally Posted by hamiltonkiler
Have you torque tuned the rear action screw? Set front screw at 40 to 45 in lbs, rear to 15 and slowly raise torque shooting 3 shot groups. You'll probably see great improvement between 20 and 25 in lbs. Mark the screw head and pillar as they tend to loosen with use. Then rework your load.
Banning a gun will not solve what is a mental health crisis inflamed by incendiary rhetoric on social and television media. The first amendment in this case is less precious and more likely the causal factor than the second amendment.
Posting Permissions
Reply With Quote
Bookmarks