Savage 116 in .250 Savage extractor/ejector problems

[Shuz]

Gunshack and Kinney's gives you a full rebuild kit.
Can also get them from Brownell or Midway.

Everyone seems to be out of stock on these kits. Any other sources I could try?

[Back2Wyo]

Just checked Midway. They have stock ejector springs, pins and extractor parts in stock.

[Robinhood]

Is the oversized ball .125 or .140? I can't remember anymore. I may have the ball if you pm me your address.

[Back2Wyo]

The standard is 1/8th and the oversized 9/64th.

[Robinhood]

The standard is 1/8th and the oversized 9/64th.

Thats what I thought. I measured mine after I posted that. I have some of the 9/64 (.140") if the OP needs it.

[Shuz]

Thats what I thought. I measured mine after I posted that. I have some of the 9/64 (.140") if the OP needs it.

I would surely like to try a larger ball and see what that does. I'll pm you my address.

[Shuz]

Robinhood-- I received the ball yesterday! Thank you very much!
Shuz