Got back from shooting the 22-250 with 52 grain and 69 grain bullets. 52 grain grouped pretty good, from 1/2-5/8 MOA. One group of the 69 grain was better, about 3/8 MOA but I didn't finish. The last shot when I ejected the primer was missing from the case. I thought that was odd, figured it got thrown out when I ejected but fortunately, before I shot again, I pulled the bolt and couldn't see through the bore. Got back home and there was brass or part of the primer lodged in the very back part. I took a cleaning rod and had to tap a few times to dislodge it. I don't want to shoot again until I get a little advice from some of you guys that know a lot more than I do.

I looked the bolt over and as much of the rest of the gun as pretty good but will do some more looking and wait until I get some advice before I shoot it again. I also am sure the powder charge was right and the bullet seating depth was correct. I double check everything since I want to be safe as possible.