Is there a bolt on thread adapter for adding a suppressor for the 64 F? Is there some thing like there is for a Ruger 10/22?
Is there a bolt on thread adapter for adding a suppressor for the 64 F? Is there some thing like there is for a Ruger 10/22?
I really don't know of anything like that, but you should have the barrel properly threaded for a suppressor anyway. It would probably be cheaper and easier to buy a rifle with the muzzle already threaded rather than have a gunsmith do it. It would probably cost about as much as the rifle when it was all said and done. But, either way, the barrel should be threaded. It is not worth ruining a suppressor you have waited on for months only to destroy due to a misalignment.
There are many smiths that will do it for 75 bucks.
The Dunning-Kruger effect is alive and well.
if there is, it will be on ebay
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Bookmarks