Reloading the Sig .277 Fury?

[geezerhood]

It will be interesting to see if the newly introduced Sig .277 Fury hybrid stainless steel and brass case can be reloaded or not. At first glance, my guess is that it could be done with the right tools and techniques. The 80,000+ PSI working pressure specification definitely got my attention.

[Fuj']

Pass.....

[yobuck]

Nothing new about that idea.
Years back a guy by name of O Conner as i recall from NC was modifying cases like that and calling them steel heads.
I think you can google (steel head cases) and the name will pop up.
I have a couple cases for a 30x378 given to me by a friend who had tried them.
You can unscrew the stainless head from the main body of the case.
Anyway all those problems solved themselves when somebody discovered the Creedmore. Lol

[Stumpkiller]

Should be no different to reload - though if the primer is crimped as most military is you're going to have to drill or ream out the primer pocket. The head shouldn't deform so it will not need to be resized. Though my guess is that even if it triples the life you get out of the brass it will still not be cost effective vs. regular cases. The necks will still eventually get tired.

Now all they need is a action that can take advantage of 80,000 psi.

[geezerhood]

I realize it isn't a new concept, but it appears they have come up with an inexpensive way to create the hybrid cases. My guess is that two piece threaded connection rifle cases were not all that cheap. If the idea takes off there will be once fired cases out there at the very least and possibly Sig or someone else will offer empty cases for reloading.

As for a rifle action to contain the 80K+ pressure, Sig has already built it. I wonder how the bolt face thrust of this cartridge with a smaller head diameter, compares to the bolt face thrust from a standard 338 Lapua? What appeals to me is the increased efficiency. I can't see myself buying the Sig rifle in 277 Fury, but I might be interested in a 338 or larger caliber that uses this type of case to match the ballistics of larger actions / larger cases.

[Axlrod]

I realize it isn't a new concept, but it appears they have come up with an inexpensive way to create the hybrid cases. My guess is that two piece threaded connection rifle cases were not all that cheap. If the idea takes off there will be once fired cases out there at the very least and possibly Sig or someone else will offer empty cases for reloading.

As for a rifle action to contain the 80K+ pressure, Sig has already built it. I wonder how the bolt face thrust of this cartridge with a smaller head diameter, compares to the bolt face thrust from a standard 338 Lapua? What appeals to me is the increased efficiency. I can't see myself buying the Sig rifle in 277 Fury, but I might be interested in a 338 or larger caliber that uses this type of case to match the ballistics of larger actions / larger cases.

I haven't seen any prices on these where did you see them? Usually government contracts and inexpensive are not together in the same place.