308 to 6 Dasher input please

[kingdombuilder]

can I make a 308 trophy hunter xp into a 6 Dasher and can I use the dbm . Do I need another type mag. : Will it fit in an ai type mag that is also an option.

[Shortbox4x4]

I haven’t followed all of the threads/builds in the PRS game but quite a few guys are running Dashers. There was quite a bit of making/modifying mags to get the Dasher to feed. You might want to search on accurate shooter forums or on Snipers Hide. I think you will find quite a bit of information especially on SH if you don’t get any reply’s here. Just a thought.

Later, Frank
Barltein Barrels

[NicfromAlabama]

I just put together a 6mm BR. I assume the Dasher will be very similar. Savage sells a magazine labeled 6mm Norma BR and I purchased one. (Part # 107239 or 55157) I have not fired the rifle yet, but dummy rounds seems to feed and extract fine. I installed an Improved Extractor kit and I cannot say it was necessary, I just went ahead and did it.

Anyway, I have discovered the 6mm BR will feed from a .308 magazine. However, I can only put two in the magazine. Adding a third results in problems having to do with too much width of the magazine and the rounds bind together down in the magazine and will not come up. The dedicated 6mm BR magazine only holds three, so you are not gaining much using the dedicated 6mm BR magazine. And, if you single feed, you will gain nothing. Single feeding seems to be easy using either magazine, and perhaps slightly easier with the .308 magazine due to extra space up top.

As far as AI mags, I think you can buy a kit to go in them to help feeding. I have some AI mags (for a .308) and tried 3 6mm dummy rounds in one, but I think feeding may not be reliable without the kit.

[kingdombuilder]

Thanks guys

[sharpshooter]

I'd bypass the headache and go with a 6x47 Lapua.

[Shortbox4x4]

I'd bypass the headache and go with a 6x47 Lapua.

That would be a good one. Also the new 6GT which is suppose to also relieve the feeding issues as well.