Pulled action (12fv - blind mag) from stock awhile back, and forgot which way spring and follower go back. Short bevel to back (makes follower on left side) ? Or the
other way.
Thanks Greg
Pulled action (12fv - blind mag) from stock awhile back, and forgot which way spring and follower go back. Short bevel to back (makes follower on left side) ? Or the
other way.
Thanks Greg
If memory serves I believe the bottom spring end points towards the muzzle end. Should be able to put the follower in one way then turn 180 degrees. One way the follower will stand taller in the blind magazine housing. Center feeds have ribs in the mag housing that will only allow the follower to enter completely. The ribs in the housing match notches in the follower..
Originally Posted by hailstone
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Bookmarks