"inexpensive?" 2000 yd group and score based on a 111 action

[mikeinco]

a i do not have the target
b you cannot measure worth krap on that coated paper
c even in the pic you can clearly see the Hole is not ROUND
d flattening the target distorts the hole.
if you want to believe you shoot 0.00x, go ahead, but in the real world it has happened
TWICE in 40 plus years. neither time was it you.

What would you measure it then, when you flattened it out it would measure anywhere from .308 to .315 diameter... that is a .007 spread.. I'll give you the one that hit a touch low but the main group had .007 in differences... obviously it's a. 308 rifle

Sent from my SM-N960U using Tapatalk

[Ted_Feasel]

a i do not have the target
b you cannot measure worth krap on that coated paper
c even in the pic you can clearly see the Hole is not ROUND
d flattening the target distorts the hole.
if you want to believe you shoot 0.00x, go ahead, but in the real world it has happened
TWICE in 40 plus years. neither time was it you.

You said it all in A: , you dont have the target.. pretty much makes all the rest of your ASSUMPTIONS moot.. 3 people measured including army marksmanship Instructor... biggest that was came up with was .315 on the wholes diameter...

Sent from my SM-N960U using Tapatalk

[mikeinco]

you cannot shoot groups on a paper that has a coating on it
you cannot measure a group if you flatten the target afterwards.
you cannot ASSume that a 30 cal bullet leaves a 0.308 dia hole in a pc of paper, they do not most of the time
an army marksmanship instructor does not measure groups with the precision required for 0.00..they do not measure groups as part of their job.
you can believe and do what you want,
it is a great group...for the 4 shots.
your picture clearly show a non-round hole visible to the naked eye....it aint 0.00x
please go start your own thread on great groups

You said it all in A: , you dont have the target.. pretty much makes all the rest of your ASSUMPTIONS moot.. 3 people measured including army marksmanship Instructor... biggest that was came up with was .315 on the wholes diameter...

Sent from my SM-N960U using Tapatalk