Hi all. I got the b&c tactical on the 12fv..pretty much drop in as b&c stated..there was some epoxy/paint run off onto alum bedding block but cleaned up nicely with little elbow work. all machining looked nicely done.triggerguard snapped right in.looks like enough clearence for the acutrigger to function have not drilled last trigger scrrew hole yet but dont seem like it be to hard it snuged up nicely with just the 1 action screw.internal mag went in nicely retaining pin snap tightly in place. Barrel clearence was good with the varmit taper barrel.done a little sanding in channel to just knock the roughness off but didn't need to just my preference..tan/w bk web color looks nice and gives u little more grip because the webbing..so now to get some range time in see how it does. Setup is 12 fv 308 26" varmit taper,Dnz tactical 30 mm mount,med height,swfa 12x moa/moa and Harris bipod 6-9..thanks all for the help