12fv 308 choate tatical or b&c medalist/tactical

[69gen1]

I also have a question on the b&c tactical about the butt pad anyone ever removed theres heard they are glued or something in case you needed to change the length of pull shorter or longer..they spec from factory 13.75

[Bill2905]

I also have a question on the b&c tactical about the butt pad anyone ever removed theres heard they are glued or something in case you needed to change the length of pull shorter or longer..they spec from factory 13.75

Mine is glued on with no fasteners. I don't have any experience with removing one.

[69gen1]

I decided on the b&c tactical ordered straight from them.I got the tan w/blk webbing.. so thanks to all with help and wisdom.will let all know how this goes..

[Robinhood]

Mine is glued on with no fasteners. I don't have any experience with removing one.

I wonder if a fella called them and asked them what they used if they would tell him.
620-225-6688

or

http://www.bellandcarlson.com/index....lay&page_id=33

[69gen1]

I wonder if a fella called them and asked them what they used if they would tell him.
620-225-6688

or

http://www.bellandcarlson.com/index....lay&page_id=33

when I called them they said it was made into the stock so I assume it has a lip or something that goes inside the stock and is glued ..they said if I need to change the trigger length they would do before shipping to me..I opted to take it the way they sell them which is 13 3/4 in..that's the std on most factory stocks and is what the tubberware stock that came on the 12fv is...