I am fairly new and green as a gourd to reloading I bought a handi rifle in 22 Hornet and have been shooting factory ammo to build up my brass stash. I have winchester as well as PPU brass. I also have 2 sets of dies Lee as well as RCBS in 22 Hornet. Using Dillon one shot for lube. A rock chucker supreme press. When first starting the case into the die it is stiffer then when doing my 45 colt rounds then stops about 3/16" from going the full stroke and is as stiff pulling it back out. The Lee die will most times pull the decap rod out of the nut as well. They seem to eject well on the first firing as will toss then over your shoulder when breaking it open. I have reloaded .223 and is a walk in the park compared to the hornet.