Yes, you will have to remove some material from the magazine area, but with a dremel and some patience it's not overly difficult.
Realize the difference, but with a little inletting would a TBR Stagger feed long action fit in a TBR Center feed long action stock? Everything is the same except the way the magazine attaches? It would be difficult to go the other way.
Bill
Yes, you will have to remove some material from the magazine area, but with a dremel and some patience it's not overly difficult.
FTR in 223, BA LE Tactical in 308, 110 Flatback in CBI 6mmBR Norma, Others
Yes I’ve done this for a friend and it was just a little material from front of magazine well I had to remove. If I remember right about 3/8” worth.
Thanks, just wanted to hear from somebody who had done it.
Bill
Bookmarks