Results 1 to 21 of 21

Thread: short chamher with brand horn brass 6.5 creed?

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 05-05-2018, 07:58 PM #1
    legion
    Status
    Offline
    Thread Starter
    Basic Member
    Join Date
    Apr 2018
    Posts
    15

    short chamher with brand horn brass 6.5 creed?

    140gr HPBTC.O.A.L. 2.810” is what my sierra manual calls for and thats minimum for that bullet
    i loaded up some today using h4350
    coal was 2.810 as per manual
    i chambered an un primed case set to that length
    and hard to close bolt and a pain to open and extract
    i see either tool marks or its hitting the rifling
    is my chamber short or is it defective
    thank you all
    Last edited by legion; 05-05-2018 at 07:58 PM. Reason: factory is 2.770 and its fine
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Two brand new FP-10SRs with short throats..
    By LB7DMAXX in forum 110-Series Rifles
    Replies: 3
    Last Post: 10-08-2015, 10:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules