Have 3 relatively new 6.5 CM, 2 model 10's FCP-SR and a 12 LRP. All 3 less than a year old, all 3 have anywhere from 500 to 1500 rounds through them. And all 3 have had chipped/cracked extractors. All 3 have broken in the same exact place. Looking at the bolt face, with the extractor at 12 o'clock, the lower left corner is breaking off. Causing intermitent extraction and little to no ejection. No matter how vigoursly I cycle the action!

I do some dry firing practice, but not enough really. And then I mostly just cock the bolt, without cycling it all the way back and forth.

Any ideas?

Or maybe I'm just snake bit!