Model 25 22 pump action rifle cleaning

[WalnutBill22]

Just unscrew the large slotted screw (you may need a screwdriver to start it) at the right rear of the receiver, then you can separate the two halves of the receiver to access the internal parts.
Once you get inside you can kind of see how it all works by sliding the forend back and forth. The bolt is easily removed and replaced, and I wouldn't recommend further
disassembly unless you have a problem. Also, make sure you only use standard velocity in it.
Good luck with it.

[pejaenke]

Thanks WalnutBill22 for the information. You don't have or know of any photos, schematics or videos about further disassembly? I think I may want to break it down further and clean it. It has been known to jam on feeding a new cartridge. I don't think this gun has been cleaned in decades.