Does anyone know where (if) there exists published exploded views and/or schematics for rifles (particularly savage rifles...specifically a 10 FCP-K)?

In particular what I'm chasing is some measurements of the outer diameter of the barrel and receiver (yes I could measure them, but the thing is with the gunsmith for a little while yet)...

The purpose is actually to try and work out what the lowest height rings are that I need for a (Falcon Menace, 44mm objective with outer objective diameter of 52mm or 2.05 inches) to clear the barrel/receiver....

For what its worth I know Leupold Medium 30mm QRW rings on a Warne Weaver Rail will clear the barrel with a fair margin for error (1/8 of an inch or so), but the low rings won't...

Going to get an EGW HD F-Class extended rail and some new rings (probably the EGW HD Tactical rings unless someone has better suggestions)...