Read a great deal about bedding the recoil lug on inexpensive plastic stocks and the results are mixed. This may be a less than brilliant question but as a temporary or simple test could tape around the recoil lug be used to snug up or reduce any gap if any between e recoil lug and the slot it fits into? Just seems it could be a simple and quick experiment to see if bedding would have any benefit? I know it is not durable etc but seems like it might be a easy and reversible test and if it showed improvement in reducing groups from 3/4 to something smaller then the stock could be properly bedded.

I know it is "Rube Goldberg" but ?

Any feedbak on this approach or has someone tried this or something similar?
KY