What do I need to change Striker bolt from 22-250 to 223?
Thanks;
joe b.
What do I need to change Striker bolt from 22-250 to 223?
Thanks;
joe b.
A short action RH .223 bolt head. You may need to open up the firing pin hole.
"As long as there's lead in the air....there's still hope.."
I just bought a 308 striker but I think I am going to go with a .243 barrel when varmint hunting and use the 55-58gr bullets.
The Striker bolt body has a bit punched through to the inside. This bit matches u shaped slots in the bolt head, essentially indexing the bolt head/bolt body. A new small-firing-pin-diameter bolt doesn't have the u shaped slots. Can I grind off the inside bolt body bit without causing any ill effects?
Thanks;
joe b.
Yes, that is the preferred solution.
"As long as there's lead in the air....there's still hope.."
Bookmarks