Results 1 to 4 of 4

Thread: Casual F/TR rig

  1. #1
    Basic Member
    Join Date
    Sep 2012
    Age
    39
    Posts
    134

    Casual F/TR rig


    I want to casually get involved in F/TR. locally, most will be 600 with the ocaisional 1000. I found a steal on a bedded 10 FCP (I think) in a B&C tactical stock.

    Main question is, how much will the 23-24" midweight (.8" MD) barrel hurt me? I can run the numbers, but how does that translate to reality.

  2. #2
    Basic Member
    Join Date
    Aug 2012
    Location
    Texas
    Age
    74
    Posts
    161
    Not a lot. Those barrels are 10 twist, and you can stabilize the Berger 185 through 210 weight bullets at 1,000 yds, and drift is about 7" per mph of crosswind. I have loaded Berger 215 hybrids in cases with 57 gr of water capacity and get to 2550-2575 fps, which gives a 1,000 yd. wind drift of 6.5" per mph of crosswind. If I could still shoot matches, I'd probably load a JLK 180 LBT to 2650 fps and expect 7 1/2" of wind drift per mph of crosswind. The guy next to you with the 32" barrel running the same bullet will have a wind drift of 7 1/8" per mph.

  3. #3
    Basic Member
    Join Date
    Sep 2012
    Age
    39
    Posts
    134
    OK, thanks. So it sounds like the variability of the factory accuracy is more of a risk than the slightly lower FPS. I guess I could almost make an argument that slower FPS will help my learning curve with wind calls.

  4. #4
    Basic Member
    Join Date
    Aug 2012
    Location
    Texas
    Age
    74
    Posts
    161
    You'll get plenty of wind-call training no matter how much money you invest in your gear. The Savage 10 FCP barrel and action are capable of accuracy in the 0.3" range for 5 shots, with proper handloads. Your stock is as good as they get, and has been bedded. Adjust your trigger so that it pulls enough weight not to decock, and get started. I shot a 5-shot group with one a few days ago, testing loads, and used Lake City cases, Nosler 155 Custom Competition bullets, and IMR 4895 powder, and got 0.28" center-to-center. I have also gotten similar results from another one just like it which I worked on a couple of years ago.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •