nope, you have to fill with weld and re-turn the new dia.
Does anyone make a smaller bolt head than 223 size for the savages, I was thinking about a 5.7x28 fn single shot build.
nope, you have to fill with weld and re-turn the new dia.
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
That dosnt sound like to much fun really, has it been done much by people on here?
not much, a few open up .223 for custom fit to ppc or others
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
The problem with a 5.7 x28 on a standard action is that they don't want to feed even in a single shot. Tha cartridge is so small in diameter and short it can't make it off the ramp into the breech with out help from your fingers.
"As long as there's lead in the air....there's still hope.."
Bookmarks