Results 1 to 21 of 21

Thread: Failure to Fire Cause

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 02-08-2018, 04:20 PM #1
    Mb1500
    Status
    Offline
    Thread Starter
    Basic Member
    Join Date
    Jun 2017
    Posts
    95
    FWIW I noticed some slight rubbing with the stock on the bolt release tab. Since it's connected to the sear I'm sure it's sucking up valuable impact energy.

    https://imgur.com/gallery/mCPH3
    Reply With Quote Reply With Quote
  2. 02-08-2018, 05:32 PM #2
    Evlshnngns
    Status
    Offline
    Basic Member
    Join Date
    Nov 2016
    Posts
    384
    How much firing pin protrusion does your gun have? With tail end of a caliper and ruler I get .052. If that is far from correct I'll remeasure, 308 axis with zero ftf's.
    Reply With Quote Reply With Quote
  3. 02-08-2018, 11:04 PM #3
    DanSavage
    Status
    Offline
    Basic Member DanSavage's Avatar
    Join Date
    Apr 2010
    Location
    Tri-County, N.Y.
    Age
    47
    Posts
    783
    Quote Originally Posted by Mb1500 View Post
    FWIW I noticed some slight rubbing with the stock on the bolt release tab. Since it's connected to the sear I'm sure it's sucking up valuable impact energy.

    https://imgur.com/gallery/mCPH3
    That was what was wrong with my buddies axis .243.��
    Reply With Quote Reply With Quote
  4. 02-08-2018, 11:04 PM #4
    DanSavage
    Status
    Offline
    Basic Member DanSavage's Avatar
    Join Date
    Apr 2010
    Location
    Tri-County, N.Y.
    Age
    47
    Posts
    783
    Quote Originally Posted by Mb1500 View Post
    FWIW I noticed some slight rubbing with the stock on the bolt release tab. Since it's connected to the sear I'm sure it's sucking up valuable impact energy.

    https://imgur.com/gallery/mCPH3
    That was what was wrong with my buddies axis .243.😉
    Reply With Quote Reply With Quote
  5. 02-09-2018, 12:50 AM #5
    Mb1500
    Status
    Offline
    Thread Starter
    Basic Member
    Join Date
    Jun 2017
    Posts
    95
    Quote Originally Posted by Evlshnngns View Post
    How much firing pin protrusion does your gun have? With tail end of a caliper and ruler I get .052. If that is far from correct I'll remeasure, 308 axis with zero ftf's.
    this one is right around .05"

    Quote Originally Posted by DanSavage View Post
    That was what was wrong with my buddies axis .243.
    Good to hear. I'm going to relieve the stock some and report back the next time I hit the range.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Savage Mod 10 Sear Failure to Fire?
    By LuvmyLRP in forum 110-Series Rifles
    Replies: 3
    Last Post: 09-16-2018, 08:42 AM
  2. Failure to fire - 10FCP-K
    By nightram in forum 110-Series Rifles
    Replies: 9
    Last Post: 04-11-2017, 05:39 PM
  3. Another SSS failure
    By dskogman in forum Vendor Feedback
    Replies: 1
    Last Post: 11-15-2016, 10:09 AM
  4. New Max 1 failure to fire?
    By 13Point in forum 110-Series Rifles
    Replies: 1
    Last Post: 06-28-2011, 10:20 PM
  5. failure to fire
    By fshooter in forum 110-Series Rifles
    Replies: 9
    Last Post: 12-06-2010, 05:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules