That's 505 Gibbs territory! Maybe a handful of wildcats with that diameter, but I don't think that savage factory chambered anything.
We just got our latest shipment of Savage parts, and as usual, there was a few mix ups in the parts and we got a few things we didn't order in place of what we did order. Interestingly, we receive something I have never seen before. At first I thought it was a 338 Lapua bolt head, but after putting the calipers on it, it appears to be a .640 bolt face. Does anyone know if Savage ever produced a rifle based on any cartridges that have a .640 rim diameter?
Regards,
Lance
Gun Shack
www.gunshack.com
That's 505 Gibbs territory! Maybe a handful of wildcats with that diameter, but I don't think that savage factory chambered anything.
20G shotgun shells have a .615" rim. Maybe the 220 bolt action shotguns uses that bolt head. Just thinkin' out of my rear.....
https://www.dickssportinggoods.com/p...220wthscp20shg
It must be for their new Chey Tac Axis.
Don't know what 20ga shell's you're measuring, but the few I just checked all measure around 0.765" on the rim.
Not sure what the .640 bolt head would be for. The .338 Lapua case head is 0.588" so I would imagine the bolt head for it would measure somewhere around 0.600". An additional 0.040" of clearance would be a lot even by Savage's typically loose standards.
"Life' is tough. It's even tougher if you're stupid." ~ John Wayne
“Under certain circumstances, urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain
It's simple.....that bolt head is a screw up, they get out from time to time. At .640", it's too big for the extractor to even fit proper.
"As long as there's lead in the air....there's still hope.."
Chey Tac is .640
Yeah I'm an idiot. I didn't grab a shell and measure the rim (even though I have boxes of 20G shells here for my Savage 24V). I google searched for "shotgun shell rim diameters" and got this image below. Too dumb to notice that the **** thing was showing bore diameters......
Here's a chart with all the dimensions...............including rim diameters. Looks like a person could use that bolt head for their very own 32gauge bolt action shotgun....
Bookmarks