go to Gun parts Corp. , you will need a BAS (bolt action screw) cocking sleeve, firing pin assembley
I have a newer Model 10T and want to get rid of the indicator in the rear of the bolt that shows the rifle is cocked.
Exactly what parts do I have to replace/add in order to do this.
I want to end up with a bolt just like the old models that just had a hex socket hole in the rear of the bolt assembly screw with no indicator.
go to Gun parts Corp. , you will need a BAS (bolt action screw) cocking sleeve, firing pin assembley
Deadshot2, I'm going to send you a PM with a link in it that I think will help you out.
The Dunning-Kruger effect is alive and well.
Bookmarks