I'm still fairly new to reloading 308 and I've run into an issue with my die. I'm getting massive dents in the cases at the start of the shoulder as well as some denting on the shoulder such as what you get by necking down cases to a smaller bullet. I get the latter whole necking down 30-06 brass to 6.5-06 before hydro forming to 260 Dingo specs. What could be some issues I'm running into? This is NOT AR used brass. It's PPU that I received from a Canadian PRS shooter who's ammo was confiscated at the border due to a screw up on his paperwork. It was once fired in his gun, and was deprimed, sized, then wet tumbled with SS media for 3 hours to ensure completely clean brass. I'm assuming it's because it's cheap PPU. I've reloaded their 38 Special cases before and I know how quickly they lose primer pocket strength.

Sent from my SM-G950U using Tapatalk