I decided to try some reloading with rl-17 since i had a few lbs laying around. I started with 39-42 grains in half grain increments and found an accuracy node at 41.5 grains. So i loaded some rounds in tenth grain increments up to 41.8 and shot them today on my lunch break. Since i was in a hurry I don't have any chrono data for these loads yet. The next time out i will chrono them. Looks like i found a keeper. Just have to see how it performs down range. I have my fingers crossed. All were 5 shot groups so i measured the 4 rounds after each first shot in a new group. (I should have loaded 6 of each). The brass is hornady and its been trimmed and turned. I used Cci br2 primers and 140gr sierra matchkings.
Rifle is a stock 10fcp-sr.



Sent from my iPhone using Tapatalk