Savage 11VT

[MI223]

I am saying that at 109 there is no clearance between the breech face and the face of the bolt. I believe the standard is .01 clearance. That would mean. 119 protruding. the .006 variation is probably do to factory tolerance.

Hope this makes sense

Sent from my SM-G930P using Tapatalk

[70oldsracer]

I am saying that at 109 there is no clearance between the breech face and the face of the bolt. I believe the standard is .01 clearance. That would mean. 119 protruding. the .006 variation is probably do to factory tolerance.

Hope this makes sense

Sent from my SM-G930P using Tapatalk

I got what you're saying, standard clearance is .001-.002". so let's say I add .002" to my .109" number, I get .111". So .1249" (let's call it .125" to make it less confusing) .125" -.111" = .014" not .006" difference. Am I adding and subtracting my numbers correct LOL! I've always been bad with thousands. I really appreciate all your help so far.