I'm new on these forums but I've been reading here for a long time.

Just bought the LRPV in .223, measured and loaded up some rounds to test at the range. Not ONE would chamber. Had some PMC factory and they chambered. Bummed!! Went home and measured again, same. Brand new brass Lapua, Norma, PPU will not chamber.

Found that any brass that has a larger diameter at the belt (.10 bottom of shell) of .3735 will not chamber, and if it does chamber, you must force the bolt to eject. This leaves a mark (scratch) in the Belt area of the shell.

Had a 100 yard match on Saturday and was able to use the PMC factory brass to make 100 rounds. Scored perfect 400 with 32 x-rings. This gun is a tackdriver, but why won't it chamber anything over .3750 at the belt?

I'm thinking a call to Savage is next. , which is an even bigger bummer since they have my 12 BTCSS for a new barrel & bolt since January.
Thanks for any input you can give me.
Lindyannajones