Savage 12 LRP

[zach_]

In my opinion, 65 in/lbs is a little too much for a Savage receiver, no matter what stock it's sitting in.

If you must,... 50 in/lbs would be the MAX I would torque them to.

Most Savage centerfire receivers are happy between 35 and 45 in/lbs.

Where did you get your info? I called Savage as I could not find a tech spec. anywhere. I was able to turn the first screw with little effort to remove for my initial cleaning. That is when I checked the second. Other actions recommend 65 inch pounds (my remmys). Several fellow shooters said the same. I will dig more after I drop what I am doing and take back my action screws to finger tight before firing again.

[barkbark]

Nice, looks familiar! I have the same rifle, but with the 4-14 SHV in Nightforce rings. Great rifle, 99/9X, 100/8X groups at 600 yards! I'm using handloads, Berger 140 hybrid with IMR 4451 powder. I am also at 65 inch pounds for the action screws. Have fun!