If you're a lefty and have been looking at or considering a newer Bushnell Elite Tactical scope, be forewarned that depending on model it may not work on your LH rifle. The problem lies with models that feature the "ThrowHammer Lever" on the magnification ring and that it will interfere with or possibly even prevent you from being able to cycle your bolt when the magnification is cranked down to the lowest settings. At the lowest setting on the DMR II-i 3.5-21x50mm I just received the lever rests at about 7 o`clock when set to 3.5X (when looking from the rear of the scope). As such there's no way you would be able to lift and cycle the bolt without hitting it. Even if you remove the lever (it attaches to an integral mount on the magnification ring via a pair of small hex screws) the mounting boss sticks up far enough that it would contact your hand and the sharp edges would likely cut you.

Clearly Bushnell degreed the cam ramp for the magnification ring to maximize clearance for right-hand guns as at max magnification the lever is at around the 1-2 o`clock position.