i presently have 2 sets of 223 dies, one is a Lee and the other is the Forster BR die set, the forster makes a very concentric load, max runout is around .001, the problem is the expander ball is too small in diameter, neck tension is too tight, the only way i get around this is i made a special .224 dia pin and made an adapter so i press this thru the neck on my last loading step, i want to do away with this step, i see lyman has a 223 full siing die with a carbide expander ball, my friend has one and it works good, question i have is does anyone make a carbide expander ball for the forster fs die, if not the only way i see to get the lyman fs die is buying the 3 die set, did i miss something, is the lyman fs die with the carbide expander ball available separate, or does any other company sell a fs die with the carbide expander ball.

Chet