Excess clay in the mag well...
![]()
Barrel taped for fore end alignment...
![]()
![]()
After setting for the night and breaking it loose...
![]()
Studs inserted to hammer on for removal...
![]()
All cleaned up...
![]()
Recoil lug and barrel nut bedding...
![]()
Receiver all cleaned up...
![]()
![]()
![]()
![]()
Perfect image of receiver machining...
![]()
I used a knife and razor to trim. A couple of small chunks came off when I was scraping. If I used a Dremel, it would have been flawless...
![]()
Invisible bedding...
![]()
![]()
![]()
![]()
Bookmarks