Hello,
First off, this is just a thought, I have not touched any of my rifles, just thinking out loud so to speak, trying to get other brains going here, other than mine, which I occasionally soak in beer or black velvet.
I would like to ask everyones opinion on taking a 110 or a Stevens 200 action, and drilling lets say 1/8" or 3/16" holes in some areas, to remove weight.
I would start by putting 4 in the top of the reciever, 2 by each scope base threaded holes, maybe even 4, in a sq pattern.
Then, maybe 2 more on each side of same area, below the scope base threaded holes, maybe not the front, where the " oh **** gas escape" holes are.
Then, lets put 6 along the "lug slide" opposite of the ejection port.
Then, lets put 6 or 8 on the bottom of the reciever, 2 rows of 3, or 2 rows of 4, on row on each side of back action screw hole.
?
OK, Let me have it.
Thanks
maybe