Replaced the Bolt Head- Bolt will not close on a loved round

[Crow Juice]

Well I removed the retaining pin that holds the ejector . However, the ejector is stuck down inside the hole. I got a new one with the new head .

[Spudgun]

Well I removed the retaining pin that holds the ejector . However, the ejector is stuck down inside the hole. I got a new one with the new head .

Last week I was shooting and after about 15 rounds the cases would not eject.

Looked at the ejector and it was about 1/32 of a inch recessed into the bolt face.

Would not come out. My guess is the spring cracked and doubled up in the ejector hole. No way to get it out easily.

Having my buddy try to use a mill and see if he can mill off some of the ejector to be able to get a hold of it and pull it out.

Where did you get your bolt face at?

Larry