Don't be shocked when it cracks right through the bolt handle cut......
Don't be shocked when it cracks right through the bolt handle cut......
"As long as there's lead in the air....there's still hope.."
You may be right and time will tell. The left bolt slot has a piece of tig rod bridging the slot and epoxied in the stock before the slot was filled. Also I used a dremel to rough up and cut grooves for the epoxy to bite to. I was surprised how hard and dense the laminate was.
Last edited by justinp61; 07-27-2016 at 05:30 PM.
Bookmarks