Quote Originally Posted by Zero333 View Post
You'll have to file part of the stock where the top bolt release is. A 5 minute job and that's all. There is a faint outline on the Factory bottom bolt release stock were it would be hollowed out if it was for a top bolt release.

Make sure the action spacing is the same.

Long action is a hair over 5" bolt spacing

Short Action stagger feed is 4.4"

Short Action center feed is 4.27"

I might have the short action center/stagger feed mixed up but you get the point.

**** I got it backwards.

I see you wanna put a bottom bolt release action into a top bolt release stock.

What jpdown said.