I lost track on this one.

Yep, 34 ft lls on the outer hole.

On the other hand, as I was reminded (or never realized as never could do it that way) offset at 90 deg is zero ft lbs so if you can then do that.

The 06 Bull came in so its now a 30-06 and went with the 90 deg.

Again reminded how nice a job NSS does on that action wrench.

took all of two hours to take the 308 bull off, put the 06 on and that included a bit of stock work in the recoil slot area work to accommodate the thicker recoil lug (I just used the narrow on the first go around)

If you were hitting and getting you could do it in an hour but I was not moving fast today and go slow on this stuff anyway. Its just plain fun and I can enjoy it longer.

Also lusting after a Savage Hunter setup, $434 with Cabella Rebate and Savage Rebate.