I appologize if this is not the right section to post this in but, didn't know which area would be the right one. I have a brand new money saver rollover stock from stockade. I have already filled and sanded all the imperfections. On friday I prepped it, degreased it and wiped it down real well. I used rubbber gloves and did what I think was a thourough job. I first started out with a can of krylon covermaxx gray primer. I sprayed several coats on it over the course of about 30 minutes, allowing about 5 minutes in between each coat. it has been hanging in my garage for almost 48 hours now. Well I went out to start prepping it for my base coat color and noticed that the primer is still soft. Its not sticky or tacky but it is definately soft. Is this an indication of me not doing something corectly or does spray paint sometimes take several days to cure? I do not have the ability to put it in an over or I would try that. Any suggestions?