None.
I can eject a loaded 338 Edge with a 3.850" OAL.
Getting it to feed as a repeater is a different story. That took a little work. But, I still used a 7mmMag box.
Milled the mag opening so that it would be flush with the bolt face when the bolt is resting on the bolt stop. Opened the front of the mag opening to be flush with the mag box of the stock.
For the magazine, I cut off both tabs. Slotted the front to let the bullets extend through. Welded a floor to the magazine. glued the whole assembly into the stock.
Bookmarks