I did a little more work today. I had to remove about 1/2in from where the trigger is on the inside of the stock and had to clearance where the sear bends at the bottom as well as radius the back of the mag well at the corners to make the action fit square.
I'm pretty close to being sanded out at 60 grit right now. I don't have a palm sander so all the sanding has been done with a block sander by hand(I'm on my way to go buy a palm sander now). Anyways thought I'd give an update with some pics.

Oh Jim said that he put the rough cut on my barrel yesterday and it should be sent out beginning of the week.