Was wondering what lenght to cut pillars for a savage 110 pillar job? Did you guys use guide screws or just your existing action screws when pillaring and bedding the stock in one step? thanks
Was wondering what lenght to cut pillars for a savage 110 pillar job? Did you guys use guide screws or just your existing action screws when pillaring and bedding the stock in one step? thanks
It wont be an exact length. It varies with different stocks. You can just measure it with dial calipers or something like that.
I use bolts from the hardware store with the heads cut off as guides. And you dont want to tighten the action screws while it sets up anyway, you want it to be a stress free bed and the tightening the screws could possibly bind.
Scooter
^^^ +1
I'm a firm believer in the theory that if it bleeds, I can kill it.
Yep, thats what you do....lay the action upside down, and put the stock down on the pillars/bolts. After that you turn it over and then electrical tape the action into the stock.
Scooter
I'm the Boss. I make sure what she wants gets done.
Bookmarks