"Standing ejector" would only apply to 2nd generation actions. The correct term for that part is "V-spring ejector." The same firing pin is used for the CRF as the other short action calibers.
"Standing ejector" would only apply to 2nd generation actions. The correct term for that part is "V-spring ejector." The same firing pin is used for the CRF as the other short action calibers.
"As long as there's lead in the air....there's still hope.."
Hmm, well this is a Model 16 FCSS Weather Warrior Controlled Round Feed on a 4.40 inch action with V-Spring ejector then. I have two of them, Fred timed and trued both, installed a bolt lift kit, and new special firing pin spring.
I do have a spare firing pin assembly, it must be from a 4.275 action or 243/260/7-08/308 because it does not work.
So are all short action firing pin assemblies are the same?
Oh the firing pin stop nut washer is broken also, I will need a new one of those too.
One of the other sites that sells firing pin assemblies shows the WSM firing pin assembly as having a different part number than the 243/260/7-08/308 firing pin assembly.
I would be happy to purchase an entire bolt assembly.
Doug
Last edited by dwm; 01-04-2016 at 11:43 PM.
Posting Permissions
Reply With Quote
Bookmarks