Striker Talk (Split from sticky)

[JCalhoun]

OOPPSIE on my part. My dumba$$ forgot about the action screw spacing on Striker action are different.

[Rupe]

OOPPSIE on my part. My dumba$$ forgot about the action screw spacing on Striker action are different.

But couldn't you fill the stock action.screw holes and drill new ones for it? The rear screw would be infront of the.grip on the rifle stock????
Rupe

[Rupe]

Question: How is an after market trigger (Timney or Basix) attached to the action when you build a rear gripped Striker? Any photo's of close up shots of the attachement would be cool too! I have.thought about this and have.just never come up with a good answer, so I thought I would ask.
Thanks in advance,
Rupe

[yorketransport]

You need to replace both the trigger and the mag box since they are sort of tied together. If you make the gun a single shot and put a plug in the mag well, then the trigger will attach just like a standard one.

Andrew

[Rupe]

You need to replace both the trigger and the mag box since they are sort of tied together. If you make the gun a single shot and put a plug in the mag well, then the trigger will attach just like a standard one.

Andrew

Wow! well that's easier then I thought. I was picturing welding cutting etc etc.
Thank You Andrew
Rupe