I can't help with a load recipe, but mine does seem to favor 175gr SMKs from SSA and FGMM ammo.
Can anyone put me on to near Harmonic Resonance with a 1:10 26" barrel. Fed.210m..Varget/168smk?
I broke it in with 150's. .977"@100..1.240"@200. Not bad for a non match cheap hunting bullet.
I've fired a few fireformed cases 42.5-45.60g varget seated anywhere from .005-.040 off of the lands. Didn't seem to make any difference that meant anything.
Any help would be greatly appreciated.
Can't find any RL-15 to save my life or i would try it.
I can't help with a load recipe, but mine does seem to favor 175gr SMKs from SSA and FGMM ammo.
What king of results were you getting with the Varget/168SMK combo?
How often do you clean the barrel? (my barrel shoots way better when it's dirty)
You can browse around on this Sniper's hide thread and look for 168SMK-Varget combinations.
http://www.scout.com/military/sniper...308-winchester
I can tell you what load works for my rifle, but my load doesn't use Varget or 168SMKs.
Bottom line is that you are probably going to have to try a few loads and keep notes before you stumble upon something your rifle likes.
Last edited by 390fe; 12-26-2015 at 04:29 PM.
I've had great results with two savage 26" model 10 rifles using 43.5 grains Varget and 168 grain bullets. -.020 off the lands for the AMAX and a little closer for the Hunting VLD bullets.
Bookmarks