Earlier this week, I decided to order an XLR Evolution chassis for my Savage 10 .308. It was something I've wanted to do for a while now, and I finally committed. In the meantime, I have been thinking about the assembly. Does anyone know if there is a recommended torque setting for the 6 screws that go in the locking block on the front of the chassis? I have read through some threads looking for the answer, and I see that the suggested max torque for the action screws are 65 in/lbs, but I have not seen anything mentioned about the other screws. I'm assuming most people are just snugging those down, but figured I would ask while I waited for the stock to arrive...............which should be next week since one was in stock.
Any other tips or suggestions are welcome too.
Thanks.
Bookmarks