I am getting ready to bed my Axis 243 into a Boyds stock. My question is do I need to worry about the engagement of the recoil lug. Right now if i tighten the action down into the Boyds stock two bad things happen. First the barrel isn't free floating when the action screws are tight, not a big deal, nothing a little sandpaper can't cure. Second, the magazine won't lock in. I figure that if I glass bed the action it will raise things up just a bit and fix both problems while also giving me a bedded action. What I am worried about is how much engagement the recoil lug will have when I am done. I am not talking about much change, maybe a 1/16 to an 1/8 of an inch. Any ideas or help is appreciated.