remove savage fcp-sr barrel, which is/are the right tool(s) for the job?

[earl39]

I soak mine in Kroil for no less than over night and then loosen the barrel nut just enough to screw the barrel off. So far i have not messed any threads up. Make sure if you are taking the barrel off an action that has a scope mounted to remove the front scope mount as the screws could be touching the barrel threads which could mess up the threads of the barrel and in unison mess up the action threads.

[vincent7]

last question (i think); since this fcp has the Savage 4.4" hole spacing receiver; is the NSS action wrench the best tool for the job, or will the wheeler work just as well (?);

http://northlandshooterssupply.com/n...aes/nss-tools/

Northland Shooters Supply (NSS) Action Wrench

[short round]

Loosen nut just enough to unscrew receiver,if lucky it will come off with no problem, if not work it back & forth while cleaning threads. Once receiver is off clean barrel threads & remove nut. Take your time, clean threads often, clean receiver threads & install barrel.