What is your setup ??
They are all important, but I guess I would say do the below first.
Work on your technique and get a good trigger or you could replace it later.
If you don't reload, start learning.
First make sure everything is freefloated, bed what you have and develop some loads
to see if you can get it to tighten up.
Next
If you have a sporter barrel get a target type (stiff) barrel, a machined recoil lug, and bed it
Make sure everything is free floated especially the tang.
If you have a Savage varmint type barrel then just do the recoil lug, bed it and free float it.
If you dont have a decent stock, then that should happen at this stage too and bed it.
Maybe a better base, scope and rings later unless the scope is really junk
then you should do it asap.
Bookmarks